CTA 7 Series Manuel d'utilisateur télécharger pdf (Page 3)

User’s Guide

UNPACKING AND SETTING UP

1. Carefully unpack the CTA and check for any damage. Inspect the contents

to ensure that you have received a tester complete with all accessories –

see “List of included items” below.

2. Place the tester on a firm, flat and level working surface free from vibration.

If preferred, the CTA can be secured to a work bench with screws through

the four tapped holes in the underside of the base. Then fasten the sample

gripping posts into the desired holes on the sliders (see Fig. 1).

CT001 flat jaws (optional)

These jaws are designed for use with square or other

shaped containers, in addition to round samples. The

jaws are reversible; one side has a V-groove, while the

other side is flat. These jaws can be mounted to the

inside of the sliders, or the outside.

CT003 adjustable jaws (optional)

These jaws are designed for use with unique shaped

samples. The four gripping arms per jaw may be inde-

pendently repositioned in 45° increments to accommo-

date unique profiles. Loosen the screw at the top of the

jaw to separate the arms and reposition as desired.

Quantity Item

1 Series CTA Torque Tester

4 Sample gripping posts

2 Flat jaws set (optional, see below)

1 Adjustable jaws set (optional, see below)

1 Carrying case (optional)

1 AC adapter

1 Battery

1 Certificate of calibration

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

CTA 7 Series Manuel d'utilisateur Page 3